DERBY "C" SERIES
BENEFITS:
Ceiling mounted.
Hot dipped galvanized frame.
Maintenance free & silent AC gear/motor with direct drive (No Belts & No Chains)
Heavy duty large turn table bearing (Made in Germany)
Partitions mounted on hinges for safety.
Electrical fencer operated from gate.
Emergency stop on controllers.
Pre-programmed controller (option) which is more reliable and easier to use.

Maximize the use of your building with a round pen in the center and exercise track on perimeter!
 
SPECIFICATIONS:
Number of horses:
Comes in 4, 5 and 6 horse configuration
Dimensions:
Stock sizes 60’, 65’ & 72’ diameter.
Custom sizes available at no extra charge.
Height at center under 11’(Easy to fit indoor).
Standard 8’ wide exercise area.
Partitions: (See page 6 )
7’ wide by 5’ to 6’ high.
Speed:
From 0 to 20+Mph
Motors:
1 1/2HP A/C motor (2HP optional)
Controllers: (See page 5 )
Manual or Pre-programmed (option)
Warranty:
10 yrs frame,2 yrs Gear/motor,1 yr electricals		          
  (Above left) EuroXcisers are powered by “NORD” Powertrain: Same gear/motor units and characteristics than Derby Serie. Thanks to its UNICASE design gear/motor is mounted up side down. Same direct drive than Derby Serie.(No Belts & No Chains). (Above right) Picture taken from the ground. The Derby "c" Series can fit wood or metal structures. (Below) Center ring diameter:45’for 60’, 49’ for 65’, 54’ for 70’  
Manufactured by:
EURO GAIT-MASTER
2658 Griffith Park Blvd.,#167,
Los Angeles, CA 90039 USA
Tel/Fax: (877) 772-EURO (3876)
e-mail:
eurogroup@sbcglobal.net